Liquid filling machines are widely used in various industries in China. These machines are designed to accurately fill a variety of liquids into containers at a high speed. However, like any equipment, liquid filling machines are prone to faults and issues that can affect their efficiency and productivity.

Here are some faults treatment for the filling machine :

To improve heat sealing quality: Confirm that the temperature has reached the desired setting and the air source pressure is above 0.8Mpa. Ensure the heat sealing knife for cross sealing is aligned with the front sealing seat. Check for any loose silicone rubber plates. 

To fix uneven film traction wheels, check that the gap between the two pairs of wheels is correct and that the rubber wheels are not distorted. If they are, replace them. Ensure the film's swelling force is even and adjust if necessary. Check that roller bearings are flexible. 

To remedy poor film bonding and heat sealing, first adjust the voltage regulator to an appropriate setting. Increase the heat sealing time and check that the heat sealing ribbon is firmly connected.

For continuous cold cutting or burring of a cylinder with a diameter of 25mm, if the output is not in place, the air pressure needs to be increased or the cylinder needs to be replaced. If the cold cutting blade is dull, it needs to be replaced. Make sure the cold cutting knife is in the center position and adjust it if it is deviating from the center position.

In conclusion, the key to treating faults in liquid filling machines is to identify the root cause of the problem and take appropriate action. By doing so, you can ensure that your machine is operating efficiently and effectively, and that your production is running smoothly.